control gear
英 [kənˈtrəʊl ɡɪə(r)]
美 [kənˈtroʊl ɡɪr]
控制装置（机构）；操纵装置；自动调整仪
双语例句
- Basic test method for electric-driving control gear assemblies
GB/T10233-1988电气传动控制设备基本试验方法 - Control gear and signal, level-crossing, mechanically or electromechanically operated
道口控制装置和信号装置，由机械或电动机械操纵 - The main products are sprocket for motorcycle ( vehicle) and crank-shaft for general machinery. chain wheel type skylight control gear
目前生产销售的两大类产品为传动链轮和通用汽油机曲轴。链轮式天窗传动装置 - Stand by spill control gear and report.
准备溢油控制装置并报告。 - The automatic control gear is suitable for various machines which need hand brake, and the gear is in particular suitable for hand brakes of automobiles.
此操纵装置适合各种需手工制动的机械，特别适合汽车的手制动器。 - This article introduces the design of a new control gear of anchoring and mooring winch.
本文介绍一种新颖的锚泊机械控制设备。 - Low voltage switchgear and control gear assembly
低压开关及控制组件 - Control gear and signal, level-crossing, electrically-powered
道口电动管理和信号装置 - Spill control gear standing by.
溢油控制装置已备妥。 - This is of great importance to noise reducing and noise control of gear system.
这对齿轮系统的减振降噪和噪声控制具有重要意义。 - By means of gear profile statistics to conduct the identification of gear manufacturing process system, a scientific and easy-operation method to assess and control gear quality is provided.
采用齿廓统计分析方法对加工工艺系统进行识别，可为齿轮质量的评定与控制提供更科学且易于操作的手段。 - Application of a Feed-Forward and Feed-Back Controller to the Active Control Landing Gear
前馈反馈控制在主动控制起落架中的应用 - A study on principal axis graduation by numerical control in gear grinding machine
锥面砂轮磨齿机主轴的数控分度研究 - This paper analyses the factors which affect gear noise, describes that we should determine gear structure parameters and accuracy of manufacture on designing and manufacturing stages and utilize in practice in order to control gear noise.
分析了影响齿轮噪声的一些因素，说明要控制齿轮噪声，在设计与制造阶段应合理地确定齿轮的结构参数及其制造精度，并根据实际情况进行综合利用。 - Taken loader as study object, the structure and theory of automatic gear shift system of construction vehicles were analyzed, and principle figure of the electric control automatic gear shift system of construction vehicles was built.
以装载机为研究对象，分析了工程车辆自动变速系统的结构及原理，建立了工程车辆电控自动变速系统组成原理图。 - FEM-Based Static& Dynamic Design of Numerical Control Gear Machining Tool Column
基于有限元分析的数控铣齿机立柱动静态设计 - Meantime, according to the control model of aircraft landing gear, the adaptive control landing gear module was simulated through Matlab.
同时，根据起落架的控制模型，通过Matlab仿真软件对采用自适应控制的起落架模型进行了仿真分析。 - The Optimizing Match between Compact Fluorescent Lamp and Electronic Control Gear
荧光灯与电子镇流器的最佳匹配 - The control gear gives up the traditional control method, and at meantime can meet the needs of all control functions expected.
它摒弃了传统的控制方式而能满足原来的全部控制功能，它体积小，重量轻，价格低廉而获得用户的好评。 - Analysis and Control on Gear Noise of Transmission System
汽车传动系齿轮噪声的分析与控制 - Dim m ing Fluorescents Fluorescent lamps require special control gear to be dimmed
朦胧的荧光荧光灯需要特殊的控制器以达到朦胧的效果 - Ways for Control Carbonitriding Gear Quality
提高碳氮共渗齿轮质量和效益的途径 - At last, the passive control landing gear module and semi-active control landing gear module are simulated. This improved mixing dielectric model yields an excellent fit to measured data.
最后通过仿真软件分别对被动控制和半主动控制的起落架模型进行了仿真分析。 - Study on Open Numerical Control Gear Hobbing System Based on DSP
基于DSP的开放体系数控滚齿系统的研究 - It adopts the digital code signal to control the gear changing and the states of the electric switch.
电子选发器采用数码信号控制换档和电子开关选通，从而克服了机械选发器的弊端。 - Analysis of dynamic and static finite element is taken concerning on a numerical control taper gear machine tool. Measurement of static rigidity and test analysis of modal experiment is done.
针对一台数控弧齿锥齿轮铣齿机，进行机床整机的有限元动态和静态分析，测量机床静刚度，进行模态实验测试及分析。 - Noise analysis and control on gear transmission of engineering mechanics
工程机械齿轮传动系统噪声分析与控制 - This article will introduce fuzzy control gear motor control, to improve the system dynamic performance of conventional fuzzy control for the existence of steady-state error problem, a method of variable Analects of Confucius, suitable for high-precision motor control gear.
本文将模糊控制引入啮合电动机的控制中，用以改善系统的动态性能，针对常规模糊控制存在的稳态误差问题，提出了可变论域的方法，适合啮合电机的高精度控制。 - In the heat treatment carburizing aspects, control gear surface carbon concentration, control workpiece cooling speed, carburizing control austenitic grain degrees, reduce the number of residual austenite, eliminate or reduce stress, controlled source selection, cooling medium choice.
在热处理渗碳淬火工艺方面，控制齿轮表面碳浓度、控制工件渗碳后冷却速度、控制奥氏体晶粒度、降低残留奥氏体的数量、消除或降低内应力、可控气源的选择、冷却介质的选择。 - Gear chamfering that can control gear noise and reduce heat stress concentration, is an important working procedure of the gear processing.
齿轮倒棱可降低齿轮传动噪音和减小热处理应力集中，是齿轮加工环节中一道重要工序。